Solutions for all types of Pumps, Volutes, Impellers and drive shafts

• Improved efficiency with hydrophobic coating
• Casting and realignment of parts
• Protection against abrasion, erosion and corrosion
• Protection against chemical attacks
• Rebuilding of pump impeller vanes
• Reconstruction of areas damaged by erosion/corrosion
• Reconstruction and protection against cavitation
• Drive shaft repair
• Repairing cracked or punctured pump bodies
• NSF 61 approved coating for drinking water

• Application of erosion/corrosion resistant coating
• Sealing leaks at flange joints
• Sealing of leaking tubes
• Insulation protection
• Protection of water tanks and end covers against corrosion
• Reconstruction of eroded/corroded tube plates
• Reconstruction of partition rods and sealing surfaces
• Repair and sealing of holed pipes
• Repair of existing coatings

• Bonding and grouting of tiles and wear plates
• Creation and repair of rubber coating
• Eliminate slippery issues with a positive, secure grip anti-slip system
• Protection of screw shafts against abrasion
• Protection of conveyor belt fasteners
• Tire Sidewall Repair
• Repairing damaged trim
• Repairing torn, torn or worn conveyor belts
• Sealing joints and gluing strips

Valves

• Reconstruction of threaded bushings
• Reconstruction of slides and guides
• Reconstruction of seats and closing areas
• Rebuilding/resurfacing of the lining carriers
• Refilling of butterfly valve shaft locations and bushing housings
• Repair of existing trim

Piping and Fittings

• Thermal insulation barrier on hot piping to prevent burns
• Creation of insulating, self-lubricating or vibration-damping coatings for pipe racks
• Protective cover for flanges allowing inspection
• Protection of internal surfaces against corrosion
• Protection and coating of the insulating material
• Reconstruction and repair of erosion/corrosion damage
• Reshaping and reconditioning of deformed or corroded flange faces
• Repairing flanges damaged by steam or with thread-like marks
• Repair of existing trim
• Repairing Leaking Pipes
• Repair and sealing of pipe expansion bellows
• Repair and protection of welding seams
• Sealing and protecting worn pipe elbows

Corrosion under insulation

• Protection against corrosion damage under insulation
• Repairing corrosion damage under insulation
• Use of hardening polymer products on hot surfaces minimizing downtime

• In-situ wedging
• Creation of waterproof joints and flashings
• On-site forming of gaskets to any contour
• Insulation of cable, pipe or conduit entry points
• Permanent repair of leaking or worn rubber components

• Sealing and protection of air tanks
• Protection of fan blades against abrasion and corrosion
• Protection of fan housing against erosion and corrosion
• Rebuilding the fan shafts
• Reconstruction of the leading edge of the fan blades damaged by abrasion
• Rebuilding of rotary compressor housings
• Reconstruction of guide slots of rotary vane compressors
• Reshaping the end covers
• Restoration of the cone game
• Repair and protection of crankcases
• Repair and protection of wind turbine blades

• Sealing of porous castings
• Sealing of access doors
• Reconstruction of torn threads
• Reconditioning and assembly of the bearings
• Pore ​​filling and casting defects
• Repairing cracks
• Repairing holes

Trees (shaft)

• Modification of load-bearing areas
• Protection of exposed areas against chemical attack and corrosion
• Keypath reconstruction
• Reconstruction of spline joints
• Reconstruction of damaged or scratched trees
• Reconditioning of the drive shaft bearings

Hydraulic Cylinders

• Protection of surfaces exposed to corrosion pitting
• On-site and cold repair of scratches

Landing accommodations

• Modification, repair or reconstruction of split-level housing
• Reshaping of ball joint housings
• Repair of “cutlass” type bearings
• Repair/replacement of low friction bearing surfaces

Pin housings and bearings

• Realigning pins in oversized housings
• Refurbishing the bearing surfaces in damaged areas

Loading and processing systems

• Strengthening of reservoir bottoms
• Repair and protection of:
  • Coalescers
  • Sand filters
  • Aerators
  • Degasifiers
  • Separators

Offshore production and drilling equipment

• Watertight primary firewalls
• Casting of mud tap inserts
• Protection of risers
• Protection of tools for drilling holes
• Thermal insulation protection
• Reconstruction and protection of chlorine injection T-pieces

Hull and external structures

• Fairing of hull sections
• Fiberglass Hull Repair
• Repairing rubber buoyancy cells
• Reconstruction and protection of stabilizers
• Reconstruction and protection of the leading edge of hydrofoil wings

Propulsion systems

• Reconstruction and protection of:
  • Propeller shaft flange
  • Casting of “Cutlass” type bearings
  • Propellers
  • Jet propulsion systems
  • Bow and stern thruster propeller tubes
  • Kort nozzles

Bridge machinery and equipment

• Deck machinery shimming
• Creation of non-slip surfaces
• Sealing of watertight doors

Mooring equipment

• Rebuilding of motorcycle pulleys
• Reconstruction and profiling of mooring bitts
• Repair and sealing of bumpers

• We have quick, simple and effective solutions to repair rollers of the following types:

  • Aspirants
  • Rubber
  • Covered
  • Gluing machine
  • Granite
  • Press
  • Head sealing
  • Dryer

  Electrical distribution

  • Reconstruction and repair of porcelain electrical insulators
  • Oil leak repair on transformers